In cheese-making, the key to a tasty, and reproducable, cheese, is keeping track of the exact pH and the temperature in the active culture. You can do this with manual tools, such as a kitchen thermometer and pH-strips, but the measurements will be crude, and depend on your constant presence. That leading to inconsistencies between batches, and difficulties in tracking errors in the process.
A digital pH-meter is expensive. You can find some from €100, but you wont get built-in temperature correction for less than €250, and wireless goes beyond €350. For continous readings and the possibility to recalibrate your sensor yourself, instead of sending it to the manufacturer, add a lot more… I havn’t yet found a device capable of tweeting its readings 😉
My diy pH-sensor is not exactly cheap either. It ticks in at about €150 in material costs. I’ve seen people look pensive when they see the casing, and subconsiously push it closer to the recycling, so a slightly pricier casing than the pet bottle might be an investment. Otherwise, the bill of materials looks like:
Atlas pH meter kit $149 (EZO version)
Arduino mini pro 3.3v $1.90
NRF24L01 radio $1
DS18B20 waterproof temp sensor $1.63
Battery holder $3
With todays exchange rates, it translates to around €150.
If you’re setting up a new sensor network, you need a radio gateway and a computer to run the controller software on too
Arduino nano $6
NRF24L01 radio $1
Old computer or raspberry pi $25-$50
You can order everything from ebay or aliexpress through the Mysensors store, but the items listed there may not always be availible in singel packages. Anyway, you will need more of those radios.
Shipping is usually free from China (who is paying that?), but the pH-kit comes from the US, so add a few euros for shipping and customs.
Measures pH-level in fluids and semi-solid compounds.
Calculates the correct pH from the latest temperature reading.
30 seconds between samples.
Continous measuring, just leave the probe in the milk and watch the readings.
Wireless transfer of data to the raspberry pi based controller unit
Presents the readings as a datastream or in nice graphs in a web interface. Use your phone or tablet to monitor the process from anywhere.
FTDI USB programmer, to program the arduino mini pro and perform calibration. If you use arduino nano instead, you can skip this, but the nano is more expensive and power consuming.
Soldering iron, lead, soldering paste.
Computer with arduino ide or codebender running.
Pliers, knives, screwdrivers and that kind of stuff.
Basic soldering. The only soldering done in my prototype is on the on/off switch. For a sturdy and reliable device to use in a kitchen environment, I recommend soldering the connections rather than using Dupont cables.
Basic programming. You can clone my code from codebender and hope it will work out of the box, but since things changed quickly on the internets of things, you will probably need to change some code to adapt to new version etc. So some understanding of coding will be helpful.
Arduino/MCU experiences. I wouldn’t recommend to make this your first microcontroller or Mysensors project. Start out with a simple blinking light and then a temperature sensor to make sure you get the IDE and Mysensors API.
Raspberry pi/Linux experiences. You could use a Windows computer as controller and user interface server, but if you’re up to arduino hacking, you might as well use an embedded device right away.